1. Moves the JMWalletDaemon service class into
the jmclient package (see the wallet_rpc.py module).
2. Adds dependencies "klein" and "autobahn" to the
jmclient package, as well as "pyjwt".
3. Adds another module websocketserver.py, using
autobahn, to allow the JMWalletDaemon service to
serve subscriptions over a websocket, for e.g.
transaction notifications.
4. Adds tests both for the websocket connection
and for the JSON-RPC HTTP connection.
JmwalletdWebSocketServerFactory.sendTxNotification
sends the json-ified transaction details using
jmbitcoin.human_readable_transaction (as is currently
used in our CLI), along with the txid.
Also adds a coinjoin state update event sent via
the websocket (switch from taker/maker/none).
Require authentication to connect to websocket.
5. Add OpenApi definition of API in yaml;
also auto-create human-readable API docs in markdown.
6. Add fidelity bond function to API
7. Add config read/write route to API
8. Remove snicker rpc calls temporarily
9. Updates to docoinjoin: corrects taker_finished
for this custom case, does not shut down at end.
10. Address detailed review comments of @PulpCattel.
Uses Klein to provide HTTP server support.
Adds cookie based auth to requests (made JWT token
based in later commits).
Basic routes are: /unlock, /lock, /display,
/create of wallet.
Encapsulates WalletDaemon as a Service
Add snicker receiver service start, stop
Adds yg/maker function as stoppable service.
Adds a JMShutdown command to
the AMP protocol, allowing a clean shutdown
of a long running bot (e.g. maker) by shutting
down its message channel connections, without
shutting down the entire process.
Adds payment(direct send) request, first draft
Fixes#899.
Before this commit, the dust threshold used to filter
orders in `jmdaemon.OrderbookWatch` was different than
that used in `jmclient`. This is corrected by setting
the threshold in client config and passing this as a
parameter in the `JMInit` command (since the daemon
does not know the client config).
If a yield generator is run with a fidelity bond wallet then the
most-valuable bond will be found and announced.
The announcement includes a proof of a UTXO and its locktime. Also a
proof that the maker's IRC nickname controls the UTXO.
There is also an intermediate signature called the certificate
signature which can later be used when holding fidelity bond UTXOs in
cold storage without the protocol needing to change. Right now this
feature is unused so certificates are generated dynamically on each
request. The certificates have an expiry block height, which is defined
as the number of 2016-block retargeting periods since the genesis
block, so to check if the expiry was passed the taker will check
`current_block_height > cert_expiry*2016`.
Parse incoming and announce outgoing fidelity bond messages
Fidelity bond proof messages will be checked and added to the internal
database just like offers. Such messages are not announced in public
but only directly to takers who ask for them, this is because the
signature proofs must commmit to the maker's and taker's IRC nicknames
in order to avoid replay attacks.
This completes the task of enabling
network isolation by running the receiver
side using a hidden service in the daemon,
and communicating over AMP, as is already
the case for the sender.
Updates test_payjoin for daemon receiver.
Qt BIP78 receiver update for daemon.
This PR creates a client-daemon protocol for
the BIP78 sender, using the base protocol
`HTTPPassThrough` which provides tor and non-tor
agents with POST and GET request functionality.
As for Joinmarket coinjoins, the use of an in-process
daemon is the default option, but it can be isolated
by changing the `[DAEMON]` section of the config.
The receiver side of BIP78 will be addressed in a
future PR.
This commit implements a command line script and a GUI
dialog to receive a payment using the BIP78 protocol,
by setting up an ephemeral hidden service.
It also deprecates the pre-existing inter-Joinmarket
protocol for payjoin payments, since we now have
both sending and receiving support for BIP78. Thus,
much code in Maker, Taker and client-daemon protocol
is removed, as is some documentation in docs/PAYJOIN.md.
Also the script `sendpayment.py` is altered to support
only the BIP78 variant.
The test in jmclient/test/test_payjoin now implements
BIP78 over a TCP connection, while the custom tests in
test/payjoinserver.py can support hidden service based
tests, but the latter is not included in the test suite
and may not always work (it is only for manual
investigations).
The following features of BIP78 are supported:
minfeerate
additionalfeeoutputindex - but *only* for single
change output transactions
maxadditionalfeecontribution
The receiver does not have nor request payment
output substitution.
Utxo selection is no longer sophisticated, instead
we only choose a single utxo to keep the size
increase of the transaction minimal. Thus UIH is
not addressed at the moment.
Errors returned are in line with BIP78.
Sequence numbers are checked by receiver, and
kept identical if uniform, otherwise respected.
Receiver uses transaction monitor to shut down
when the payment is seen.
The workflow is almost entirely implemented in
jmclient/payjoin.py and the command line script
is in scripts/receive-payjoin.py. The setup, including
configuration changes for Tor, are documented in
docs/PAYJOIN.md, including a user guide video linked.
Prior to this commit, users setting the POLICY config
option `tx_broadcast` to anything other than `self` would
cause a crash after the merge of #536 due to a bin/hex
conversion failure (before this merge, the tx would simply
fail to broadcast).
This commit adds a `JMTXBroadcast` AMP command so that makers
can send arbitrary transactions from daemon to client, for
broadcast via the blockchain interface. This allows the
existing code in `taker.push()` to function correctly, after
fixing the bin/hex conversion bug. Hence users can now select
`random-peer` or `not-self` and the transaction will be
broadcast as expected according to the comments, and the
WalletService will react to the broadcast just as it does
currently for self-broadcast.
Note that this change will be ineffective if the counterparties
do not support it; the transaction will simply remain un-broadcast.
Update no-history-sync code:
This updates the new functionality in jmclient.wallet_utils
in the no-history-sync PR #444 to be compatible
with the python-bitcointx refactoring.
Remove all future/py2 compatibility code remaining:
This is in line with #525 and corrects erroneous
addition of more compatibility code.
Addresses all flake8 complaints (ununsed imports etc)
Addresses review of @dgpv
Addresses review of @kristapsk
Prior to this commit, the callback method in the
DaemonServerProtocol, on_commitment_seen, was using
a reference to jm_single (to access the config var
accept_commitment_broadcasts) which was not valid
as jm_single() is part of jmclient and is not accessible
to jmdaemon. This error was being swallowed by a finally:
block in the message channel method check_for_commitments,
resulting in public broadcast hp2 messages being ignored.
This commit removes the reference to accept_commitment_broadcasts,
thus resulting in all publically broadcast hp2 messages being
stored in the commitmentlist.
- update mktx() to allow optional locktime setting (and sequence)
- add a mk_shuffled_tx method to the wallet module
- add a P2EPTaker and P2EPMaker class (inherit from Taker, Maker)
- add a -T option to sendpayment script for doing payjoins
- add a receive_payjoin script for receivers.
- add payjoin tests in jmclient/test/test_payjoin.py
- add a custom utxo selection method select_one_utxo to support.py
- support bech32 wallets (SegwitWallet, p2wpkh) with native=true
in config POLICY for PayJoin and direct send (not Joinmarket CJ)
- add a PayJoin.md usage guide in docs/
- include version bytes in pubkey message for forward compat
- taker pays fees but controls size (utxo number and fee/kB)
- add P2WPKH fee estimator
- Enforce INFO level logging in payjoin
- refactors regtest config settings into one place
- bugfix: script_to_address vbyte argument is bytes not integer
Modify tooltip for Start button to explain Abort
Retrieve nonresponsive makers in daemon and pass to client
Taker receives ignored_makers in init and client adds
Introduces an additional jm_state to avoid resending JMTX in case
the response to checkUtxosAccepted takes too long.
Fix bug in -Qt where blockr wallet sync is called with fast option.
Make unconfirmed message more informative (more TODO here).
Fix bug in blockr_data (from upstream).
New module jmclient.schedule currently only parses schedule files,
and returns an array of tuples as a schedule.
Option added to sendpayment (-S) to pass in a schedule file, instead
of using command line arguments (still valid for single joins).
Added intermediate state to daemon to track whether ioauths have been
already sent, to prevent duplicate sending on timeout.
Adam Gibson
undeath
chris-belcher
Kristaps Kaupe
James Hilliard