This completes the task of enabling
network isolation by running the receiver
side using a hidden service in the daemon,
and communicating over AMP, as is already
the case for the sender.
Updates test_payjoin for daemon receiver.
Qt BIP78 receiver update for daemon.
This PR creates a client-daemon protocol for
the BIP78 sender, using the base protocol
`HTTPPassThrough` which provides tor and non-tor
agents with POST and GET request functionality.
As for Joinmarket coinjoins, the use of an in-process
daemon is the default option, but it can be isolated
by changing the `[DAEMON]` section of the config.
The receiver side of BIP78 will be addressed in a
future PR.
This commit implements a command line script and a GUI
dialog to receive a payment using the BIP78 protocol,
by setting up an ephemeral hidden service.
It also deprecates the pre-existing inter-Joinmarket
protocol for payjoin payments, since we now have
both sending and receiving support for BIP78. Thus,
much code in Maker, Taker and client-daemon protocol
is removed, as is some documentation in docs/PAYJOIN.md.
Also the script `sendpayment.py` is altered to support
only the BIP78 variant.
The test in jmclient/test/test_payjoin now implements
BIP78 over a TCP connection, while the custom tests in
test/payjoinserver.py can support hidden service based
tests, but the latter is not included in the test suite
and may not always work (it is only for manual
investigations).
The following features of BIP78 are supported:
minfeerate
additionalfeeoutputindex - but *only* for single
change output transactions
maxadditionalfeecontribution
The receiver does not have nor request payment
output substitution.
Utxo selection is no longer sophisticated, instead
we only choose a single utxo to keep the size
increase of the transaction minimal. Thus UIH is
not addressed at the moment.
Errors returned are in line with BIP78.
Sequence numbers are checked by receiver, and
kept identical if uniform, otherwise respected.
Receiver uses transaction monitor to shut down
when the payment is seen.
The workflow is almost entirely implemented in
jmclient/payjoin.py and the command line script
is in scripts/receive-payjoin.py. The setup, including
configuration changes for Tor, are documented in
docs/PAYJOIN.md, including a user guide video linked.
Prior to this commit, users setting the POLICY config
option `tx_broadcast` to anything other than `self` would
cause a crash after the merge of #536 due to a bin/hex
conversion failure (before this merge, the tx would simply
fail to broadcast).
This commit adds a `JMTXBroadcast` AMP command so that makers
can send arbitrary transactions from daemon to client, for
broadcast via the blockchain interface. This allows the
existing code in `taker.push()` to function correctly, after
fixing the bin/hex conversion bug. Hence users can now select
`random-peer` or `not-self` and the transaction will be
broadcast as expected according to the comments, and the
WalletService will react to the broadcast just as it does
currently for self-broadcast.
Note that this change will be ineffective if the counterparties
do not support it; the transaction will simply remain un-broadcast.
Update no-history-sync code:
This updates the new functionality in jmclient.wallet_utils
in the no-history-sync PR #444 to be compatible
with the python-bitcointx refactoring.
Remove all future/py2 compatibility code remaining:
This is in line with #525 and corrects erroneous
addition of more compatibility code.
Addresses all flake8 complaints (ununsed imports etc)
Addresses review of @dgpv
Addresses review of @kristapsk
Replaces core transaction, address, serialization
and sign functionality for Bitcoin with
python-bitcointx backend.
Removes bech32 and btscript
modules from jmbitcoin. Removes all string,
hex, binary conversion routines. A generic
hex/binary conversion now is added to jmbase.
Removes all transaction serialization and
deserialization routines. Removes the now
irrelevant test modules.
Remaining functions in jmbitcoin remove any parsing of
hex format, requiring callers to use binary only.
One additional test added, testing the remaining
function in secp256k1_transaction.py: the signing
of transactions. Deserialized form is now
bitcointx.CMutableTransaction.
For jmbase, in addition to the above, generic conversions
for utxos to and from strings is added, and a dynamic conversion
for AMP messages to binary-only. Within the code, utxos are
now only in (binarytxid, int) form, except where converted
for communcation.
Tthe largest part of the changes are
the modifications to jmbitcoin calls in jmclient;
as well as different encapsulation with CMutableTransaction,
there is also a removal of some but not all hex parsing;
it remains for rpc calls to Core and for AMP message
parsing. Backwards compatibility must be ensured so some
joinmarket protocol messages still use hex, and it is
also preserved in persistence of PoDLE data.
As part of this, some significant simplification of
certain legacy functions within the wallet has been done.
jmdaemon is entirely unaltered (save for one test which
simulates jmclient code).
Prior to this commit, the callback method in the
DaemonServerProtocol, on_commitment_seen, was using
a reference to jm_single (to access the config var
accept_commitment_broadcasts) which was not valid
as jm_single() is part of jmclient and is not accessible
to jmdaemon. This error was being swallowed by a finally:
block in the message channel method check_for_commitments,
resulting in public broadcast hp2 messages being ignored.
This commit removes the reference to accept_commitment_broadcasts,
thus resulting in all publically broadcast hp2 messages being
stored in the commitmentlist.
To facilitate easier management by users and to
follow generally accepted standards, this PR moves
the following all to user home directory, subdir
.joinmarket :
joinmarket.cfg file
wallets/ directory
logs/ directory
cmtdata/ directory
commitmentlist file
User can override location with --datadir option.
An info message is added on startup showing location.
updated xenial and stretch dockerfiles since they bundle old versions of libsodium
refacatoring to make BlockchainInterface and BitcoinCoreNoHistoryInterface python2 compatible
add the -acceptnonstdtxn flag when invoking bitcoind for versions >= 0.19.0
refactor the use of nonlocal to make it compatible with python2
document the get_bitcoind_version method
Fixes#105.
Prior to this commit the channel chosen to send on in a
call to MessageChannelCollection.prepare_privmsg was not
respect and instead the entry in the active_channels was
used, resulting in a Taker not seeing the presence of Makers
in other channels than the one chosen here. This meant that
in cases of channel disconnection, fallback to other channels
was failing (although not always deterministically). This
commit fixes this by allowing the sending of the privmsg
on a specific channel, as was intended, and so when Makers
send messages on multiple channels, they are marked as seen
on all those channels, allowing dynamic switching in case
of channel connection failures.
In addition there are two minor improvements to debug
messages.
This is the first mitigation of issue #105 , so it doesnt crash and prints useful log output for users to handle this issue.
Fixing this problem by switching to another message channel is way more complex.
- update mktx() to allow optional locktime setting (and sequence)
- add a mk_shuffled_tx method to the wallet module
- add a P2EPTaker and P2EPMaker class (inherit from Taker, Maker)
- add a -T option to sendpayment script for doing payjoins
- add a receive_payjoin script for receivers.
- add payjoin tests in jmclient/test/test_payjoin.py
- add a custom utxo selection method select_one_utxo to support.py
- support bech32 wallets (SegwitWallet, p2wpkh) with native=true
in config POLICY for PayJoin and direct send (not Joinmarket CJ)
- add a PayJoin.md usage guide in docs/
- include version bytes in pubkey message for forward compat
- taker pays fees but controls size (utxo number and fee/kB)
- add P2WPKH fee estimator
- Enforce INFO level logging in payjoin
- refactors regtest config settings into one place
- bugfix: script_to_address vbyte argument is bytes not integer
Kristaps Kaupe
Adam Gibson
Jules Comte
jules23
James Hilliard
AlexCato
Tim Akinbo
Alex Cato
AlexCato