This commit implements a command line script and a GUI
dialog to receive a payment using the BIP78 protocol,
by setting up an ephemeral hidden service.
It also deprecates the pre-existing inter-Joinmarket
protocol for payjoin payments, since we now have
both sending and receiving support for BIP78. Thus,
much code in Maker, Taker and client-daemon protocol
is removed, as is some documentation in docs/PAYJOIN.md.
Also the script `sendpayment.py` is altered to support
only the BIP78 variant.
The test in jmclient/test/test_payjoin now implements
BIP78 over a TCP connection, while the custom tests in
test/payjoinserver.py can support hidden service based
tests, but the latter is not included in the test suite
and may not always work (it is only for manual
investigations).
The following features of BIP78 are supported:
minfeerate
additionalfeeoutputindex - but *only* for single
change output transactions
maxadditionalfeecontribution
The receiver does not have nor request payment
output substitution.
Utxo selection is no longer sophisticated, instead
we only choose a single utxo to keep the size
increase of the transaction minimal. Thus UIH is
not addressed at the moment.
Errors returned are in line with BIP78.
Sequence numbers are checked by receiver, and
kept identical if uniform, otherwise respected.
Receiver uses transaction monitor to shut down
when the payment is seen.
The workflow is almost entirely implemented in
jmclient/payjoin.py and the command line script
is in scripts/receive-payjoin.py. The setup, including
configuration changes for Tor, are documented in
docs/PAYJOIN.md, including a user guide video linked.
Without this flag set, the python-bitcointx Script
verification will use openssl for non-strict encoding,
which requires a libopenssl dependency. Moreover non-
strict encoding is now out of consensus so is not needed
for our purpose.
Upgrade python-bitcointx to 1.1.0:
Address requirements of python-bitcointx 1.1.0:
Specifically, the witness `utxo` field can no longer be
assumed to be of type CTxOut, so we should access the
CTxOut with the field witness_utxo and also when updating
the `utxo` field we now use `set_utxo()`.
Use PartiallySignedTransaction.get_fee() method.
Use PartiallySignedTransaction.set_utxo.
Additionally some minor typos/comment corrections and removal
of the now defunct `apply_freeze_signature`.
Add custom load location for libsecp where needed;
falls back to system installation if Joinmarket custom
installation is not found.
Decode error msg from server in payjoin
Cleanup test file test_proposals.txt (delete after test)
Human readable function names (names for human readable
conversions are now themselves human readable).
Remove unused get_*_vbyte functions and cleanup
Removes old unused files (electrum*.py).
Fixes core nohistory sync test to use both standard
wallet types, and fixes address import counter.
Fixes that test to use the right chain params so that
native segwit wallets can work in regtest with
nohistory mode.
Removes some now unneeded imports.
Fixes commontest.create_wallet_for_sync to hash all
parameters, including optional ones.
Replaces usage of binascii.hexlify with bintohex.
Note in particular that:
bitcoin.mktx in this PR now does support script
entries in outputs to account for nonstandard
destinations (as is needed for burn).
bitcoin.sign now supports p2wsh (as is needed
for timelocks).
Fix bug in Coins tab, get_utxos_by_mixdepth calls
Fix bug in jmbitcoin.mktx, now respects nVersion choice
Fix bug in tumbler restart wait
Fix bug in makercount for payjoin for fee check, set to 0:
The value of `options.makercount` is set to zero
so that the fee sanity check in the sendpayment script
operates approximately correctly (the receiver will bump
the fee to keep the fee rate the same if necessary).
Also the `bip79` variable is better named `payjoinurl`.
Fix bug in "freeze" context menu function in Qt
See:
https://github.com/bitcoin/bips/blob/master/bip-0078.mediawiki
Adds a new module jmclient.payjoin which implements
the full sender workflow from a BIP21 uri to a
payjoin broadcast, state is managed in JMPayjoinManager,
includes all checks as per documentation of
btcpayserver (and later, BIP78).
Added simple client and server implementations in
test/payjoinclient.py and test/payjoinserver.py
which allow a full end to end test on regtest.
Add TLS support to payjoin tests:
Note: the jmclient.payjoin module already
supports TLS by default (Agent object), but
here we add the ability to test without
certificate verification. Both test/payjoinclient.py
and test/payjoinserver.py now support TLS, but
the server needs a key and certificate in its
directory to run.
Adds BIP78 payjoin option to sendpayment.py
Users can use a bip21 uri with the "pj" field to
send a payment to a remote server.
Removes require_path_templates setting from KeyStore call
in PSBTWalletMixin.sign_psbt
Human readable representation for CTransaction
objects in jmbitcoin.secp256k1_transaction.py and for
PartiallySignedTransaction objects in jmclient.wallet.
PSBTWalletMixin, use of these in maker, taker, direct
send and in tests. Users should note that PSBT human
readable representations can in some cases be really
huge.
Update no-history-sync code:
This updates the new functionality in jmclient.wallet_utils
in the no-history-sync PR #444 to be compatible
with the python-bitcointx refactoring.
Remove all future/py2 compatibility code remaining:
This is in line with #525 and corrects erroneous
addition of more compatibility code.
Addresses all flake8 complaints (ununsed imports etc)
Addresses review of @dgpv
Addresses review of @kristapsk
This commit uses the now created PSBTWalletMixin and additionally
creates a SNICKERWalletMixin, and adds a SNICKERReceiver object
to jmclient. A test of the end to end workflow of create and then
co-sign a SNICKER coinjoin as per the draft BIP is in test_snicker.
Additional changes:
updated python-bitcointx dependency to >=1.0.5
Minor refactoring of callbacks in tests and additional redeem
script checks to PSBTWalletMixin.sign_psbt.
Note that this work replaces #403 .
Subclassed btcointx.CKeyBase to create a privkey type
that uses our signing code.
These are then used to allow signing of inputs in
transactions owned by our wallet.
Created a PSBTWalletMixin to perform the above function,
and added it to our three wallet types.
Wrote a detailed creation, sign and broadcast test
for a psbt using utxos from within and outside the wallet.
Detailed tests across all 3 wallet types for psbt
Tests cover also mixed inputs of different
types and owned/unowned. Direct send now exported to be used
in tests rather than only script usage, also supports returning
a tx object rather than only a txid.
Replaces core transaction, address, serialization
and sign functionality for Bitcoin with
python-bitcointx backend.
Removes bech32 and btscript
modules from jmbitcoin. Removes all string,
hex, binary conversion routines. A generic
hex/binary conversion now is added to jmbase.
Removes all transaction serialization and
deserialization routines. Removes the now
irrelevant test modules.
Remaining functions in jmbitcoin remove any parsing of
hex format, requiring callers to use binary only.
One additional test added, testing the remaining
function in secp256k1_transaction.py: the signing
of transactions. Deserialized form is now
bitcointx.CMutableTransaction.
For jmbase, in addition to the above, generic conversions
for utxos to and from strings is added, and a dynamic conversion
for AMP messages to binary-only. Within the code, utxos are
now only in (binarytxid, int) form, except where converted
for communcation.
Tthe largest part of the changes are
the modifications to jmbitcoin calls in jmclient;
as well as different encapsulation with CMutableTransaction,
there is also a removal of some but not all hex parsing;
it remains for rpc calls to Core and for AMP message
parsing. Backwards compatibility must be ensured so some
joinmarket protocol messages still use hex, and it is
also preserved in persistence of PoDLE data.
As part of this, some significant simplification of
certain legacy functions within the wallet has been done.
jmdaemon is entirely unaltered (save for one test which
simulates jmclient code).
Watch only wallets can now be created via wallet-tool. The wallets
store a bip32 xpub key from which all the public keys are generated.
Watch only wallets only store and display the zeroth mixdepth, which
is the only one needed for fidelity bonds.
The bip32 xpub key needed to create a watch only wallet is now
specially highlighted in the wallet-tool display, this is to help users
actually find it amongst all the other xpubs.
The field key_ident in the wallet class was previously generated using
private keys, which are not available in watch only wallets. So now
for fidelity bond wallets key_ident is generated using a public key.
Existing non-fidelity-bond wallets are unaffected
Fidelity bond wallets are intended to be used when at a later date
using fidelity bonds to greatly increase joinmarket's resistance to
sybil attacks. This commit adds support for timelocked addresses.
It allows users to optionally create wallet which support such
addresses. The synchronization code is modified to also scan for
timelocked addresses. The keypairs of the timelocked addresses go in
the newly created 2nd address type, where before the zeroth index were
receive addresses and first index was change.
The locktime dates are fixed at the first of each month for the next 30
years. This means users dont need to remember any dates, and so just
their seed phrase and wallet type will still be enough to recover all
funds. Each keypair used for timelocking requires an additional 360
addresses to be scanned for, which isn't a problem for Bitcoin Core.
Fidelity bonds are only stored in the zeroth mixdepth, as they are not
used in repeated coinjoins so theres no point having them in multiple
mixdepths.
Timelocked addresses don't use the get_new_script() family of functions
because they all assume that one index equals one address, and that
therefore it's possible to ask for a "next" address. For timelocked
addresses knowing the index is not enough to know the address, the
timestamp must be known too. Also once one address made of
(index, timestamp) is used you mustn't use that index and pubkey again,
even though all the other timelocks for that index/pubkey are unused.
This is for privacy reasons, as its equivalent to address reuse.
Introduces WalletService object which is in control of
blockchain and wallet access.
The service manages a single transaction monitoring loop,
instead of multiple, and allows updates to the wallet from
external sources to be handled in real time, so that both Qt
and other apps (yg) can respond to deposits or withdrawals
automatically.
The refactoring also controls access to both wallet and
blockchain so that client apps (Taker, Maker) will not need
to be changed for future new versions e.g. client-side filtering.
Also updates and improves Wallet Tab behaviour in Qt (memory
of expansion state).
Additionally, blockchain sync is now --fast by default, with
the former default of detailed sync being renamed --recoversync.
- update mktx() to allow optional locktime setting (and sequence)
- add a mk_shuffled_tx method to the wallet module
- add a P2EPTaker and P2EPMaker class (inherit from Taker, Maker)
- add a -T option to sendpayment script for doing payjoins
- add a receive_payjoin script for receivers.
- add payjoin tests in jmclient/test/test_payjoin.py
- add a custom utxo selection method select_one_utxo to support.py
- support bech32 wallets (SegwitWallet, p2wpkh) with native=true
in config POLICY for PayJoin and direct send (not Joinmarket CJ)
- add a PayJoin.md usage guide in docs/
- include version bytes in pubkey message for forward compat
- taker pays fees but controls size (utxo number and fee/kB)
- add P2WPKH fee estimator
- Enforce INFO level logging in payjoin
- refactors regtest config settings into one place
- bugfix: script_to_address vbyte argument is bytes not integer
* parsing of scripts and addresses of all segwit types.
* ability to verify arbitrary tx inputs for all segwit types.
* simplify mktx syntax (only allow [],[] args)
* add p2wpkh and p2wsh spending test and fixes to sign calls in wallet
* simplify wallet signing calls in cryptoengine
* add p2wpkh engine, add bip84 wallet
Previous to this commit, the jmbitcoin package was accessed via
a file in jmclient `btc.py` which was originally added as an
interface to allow the client to use a non-jmbitcoin package to
provide the implementation; while this idea is useful, the way
it was implemented was not, moreover it is not currently used
and contained duplicated code that was unmanaged. Also, the
original usage of this was only by the electrum plugin, which
has currently been abandoned. This simplifies the code and
avoids spurious error messages. Note that most of the changes
are a result of pulling the logging function directly from the
jmbase package instead of indirectly via this interface (which
was unnecessary and not connected with jmbitcoin).
More on bug: when signing txs with SW and non-SW inputs, the
existing signature_form for non-SW inputs didnt pay attention
to whether the tx serialization was SW or non-SW style, so if
a SW-style tx serialization was passed in, it was kept in SW
form after passing through signature_form, resulting in an attempt
to create a signature based on SW style sighashing. The fix here
just ensures that signature_form always enforces the tx format
to be non-SW style, so allowing callers to sign() to get a valid
signature whatever they pass in.
Adam Gibson
Kristaps Kaupe
Jules Comte
chris-belcher
James Hilliard
undeath