6.8 KiB

Raw Blame History

Qml GUI

The Qml GUI is used with Electrum on Android devices, since Electrum 4.4. To generate an APK file, follow these instructions.

(note: older versions of Electrum for Android used the "kivy" GUI)

Android binary with Docker

✓ These binaries should be reproducible, meaning you should be able to generate binaries that match the official releases.

This assumes an Ubuntu (x86_64) host, but it should not be too hard to adapt to another similar system.

Install Docker

See contrib/docker_notes.md.

(worth reading even if you already have docker)
Build binaries

The build script takes a few arguments. To see syntax, run it without providing any:
```
$ ./build.sh
```
For development, consider e.g. $ ./build.sh qml arm64-v8a debug

If you want reproducibility, try instead e.g.:
```
$ ELECBUILD_COMMIT=HEAD ./build.sh qml all release-unsigned
```
The generated binary is in ./dist.

Verifying reproducibility and comparing against official binary

Every user can verify that the official binary was created from the source code in this repository.

Build your own binary as described above. Make sure you don't build in debug mode, instead use either of release or release-unsigned. If you build in release mode, the apk will be signed, which requires a keystore that you need to create manually (see source of make_apk.sh for an example).
Note that the binaries are not going to be byte-for-byte identical, as the official release is signed by a keystore that only the project maintainers have. You can use the apkdiff.py python script (written by the Signal developers) to compare the two binaries.
```
$ python3 contrib/android/apkdiff.py Electrum_apk_that_you_built.apk Electrum_apk_official_release.apk
```
This should output APKs match!.

FAQ

I changed something but I don't see any differences on the phone. What did I do wrong?

You probably need to clear the cache: rm -rf .buildozer/android/platform/build-*/{build,dists}

How do I deploy on connected phone for quick testing?

Assuming adb is installed:

$ adb -d install -r dist/Electrum-*-arm64-v8a-debug.apk
$ adb shell monkey -p org.electrum.electrum 1

How do I get an interactive shell inside docker?

$ docker run -it --rm \
    -v $PWD:/home/user/wspace/electrum \
    -v $PWD/.buildozer/.gradle:/home/user/.gradle \
    --workdir /home/user/wspace/electrum \
    electrum-android-builder-img

How do I get more verbose logs for the build?

See log_level in buildozer.spec

How can I see logs at runtime?

This should work OK for most scenarios:

adb logcat | grep python

Better grep but fragile because of cut:

adb logcat | grep -F "`adb shell ps | grep org.electrum.electrum | cut -c14-19`"

The Qml GUI can be run directly on Linux Desktop. How?

Install requirements:

python3 -m pip install "pyqt6==6.5.2" "Pillow>=8.4"

Run electrum with the -g switch: electrum -g qml

Notes:

pyqt ~6.4 would work best, as the gui has not yet been adapted to styling changes in 6.5
However, pyqt6 as distributed on PyPI does not include a required module (PyQt6.QtQml) until 6.5

Installing these deps from your OS package manager should also work, except many don't distribute pyqt6 yet. For pyqt5 on debian-based distros, this used to look like this:

sudo apt-get install python3-pyqt5 python3-pyqt5.qtquick python3-pyqt5.qtmultimedia
sudo apt-get install python3-pil
sudo apt-get install qml-module-qtquick-controls2 qml-module-qtquick-layouts \
    qml-module-qtquick-window2 qml-module-qtmultimedia \
    libqt5multimedia5-plugins qml-module-qt-labs-folderlistmodel

debug vs release build

If you just follow the instructions above, you will build the apk in debug mode. The most notable difference is that the apk will be signed using a debug keystore. If you are planning to upload what you build to e.g. the Play Store, you should create your own keystore, back it up safely, and run ./contrib/make_apk.sh release.

See e.g. kivy wiki and android dev docs.

Access datadir on Android from desktop (e.g. to copy wallet file)

Note that this only works for debug builds! Otherwise the security model of Android does not let you access the internal storage of an app without root. (See this) To pull a file:

$ adb shell
adb$ run-as org.electrum.electrum ls /data/data/org.electrum.electrum/files/data
adb$ exit
$ adb exec-out run-as org.electrum.electrum cat /data/data/org.electrum.electrum/files/data/wallets/my_wallet > my_wallet

To push a file:

$ adb push ~/wspace/tmp/my_wallet /data/local/tmp
$ adb shell
adb$ ls -la /data/local/tmp
adb$ run-as org.electrum.testnet.electrum cp /data/local/tmp/my_wallet /data/data/org.electrum.testnet.electrum/files/data/testnet/wallets/
adb$ rm /data/local/tmp/my_wallet

Or use Android Studio: "Device File Explorer", which can download/upload data directly from device (via adb).

How to investigate diff between binaries if reproducibility fails?

cd dist/
unzip Electrum-*.apk1 -d apk1
mkdir apk1/assets/private_mp3/
tar -xzvf apk1/assets/private.mp3 --directory apk1/assets/private_mp3/

unzip Electrum-*.apk2 -d apk2
mkdir apk2/assets/private_mp3/
tar -xzvf apk2/assets/private.mp3 --directory apk2/assets/private_mp3/

sudo chown --recursive "$(id -u -n)" apk1/ apk2/
chmod -R +Xr  apk1/ apk2/
$(cd apk1; find -type f -exec sha256sum '{}' \; > ./../sha256sum1)
$(cd apk2; find -type f -exec sha256sum '{}' \; > ./../sha256sum2)
diff sha256sum1 sha256sum2 > d
cat d

How to install apks built by the CI on my phone?

The CI (Cirrus) builds apks on most git commits. See e.g. here. The task name should start with "Android build". Click "View more details on Cirrus CI" to get to cirrus' website, and search for "Artifacts". The apk is built in debug mode, and is signed using an ephemeral RSA key.

For tech demo purposes, you can directly install this apk on your phone. However, if you already have electrum installed on your phone, Android's TOFU signing model will not let you upgrade that to the CI apk due to mismatching signing keys. As the CI key is ephemeral, it is not even possible to upgrade from an older CI apk to a newer CI apk.

However, it is possible to resign the apk manually with one's own key, using e.g. apksigner, mutating the apk in place, after which it should be possible to upgrade:

apksigner sign --ks ~/wspace/electrum/contrib/android/android_debug.keystore Electrum-*-arm64-v8a-debug.apk

6.8 KiB Raw Blame History